Trailer Plug Adapters When Connecting My Utility Trailer's Lights To My Trucks Connector, The Fuse For The LH Tail Light Blows. Why?
When connecting my utility trailer's lights to my trucks connector, the fuse for the LH Tail light blows. Why? - trailer plug adapters
I recently replaced and rewired the lighting in my program supporters, and not according to the instructions in the letter. I have a "T" Hopkins adapter plugs connect specifically with a tail light converter for my 2005 Chevrolet Colorado 4 in conjunction I have the truck trailer.
Once the connector to the truck-trailer plug, the fuse that controls LH taillight blown away. I fear that the problem could be a ground for the poor, electric trailer, but I would really appreciate your opinion as to solve the best way to get the problem. Thank you for your help and I need to provide you with more detailed information to decide to help, please let me know.
Thank you again
|
4 comments:
Somewhere in the wiring of the trailer with a hot wire that is empty and touching the ground, so that a short one. Find and replace the cable.
Nah not because of the rough terrain. What should I do get a multimeter and test your trailer plug. After determining what is good. You are your way back into the trailer wiring and see if all cables are securely connected. Disconnect the cable and replace if necessary.
a short dead draws too much power for a backup backup handle.try little bigger and see if it holds, if you do not get some things can be done even before the extraction of supporters with a multimeter. Good luck!
They have a hotline, where he explained some of his followers, check the cables and make-up and a battery and connect it to your trailer and see if all the work lights on the trailer.
Post a Comment